Click to Enlarge Image
The Americana Collection
CHICAGO
  • Translucent White Acrylic Half-Round Diffuser
  • Aluminum Extruded Square 5 Bar Cage 
Download: Chicago Spec-Sheet
*Click +/- to expand/collapse information
−   Product Specifications:
Ballast: 120 or 277 Volt, extreme temp range -30°C to 90°C, HPF electronic ballast [EBX] for FL. Metal Halide: HPF QV/Pulse Start Magnetic Ballast is Standard; Optional Electronic Ballast [EBMH].

Backbox: 16 gauge aluminum. Wire access through .875" diameter knockouts on four sides and back. Water tight. Standard with emergency battery, H.I.D., Induction and some fluorescent models. Optional for surface conduit entry.

Backplate: 16 gauge aluminum

Cage: Standardized .375" or .5" diameter aluminum guard bars secured by hidden means to the frame. Standard square extruded bars. Standard configurations shown; custom spacing available.

Diffuser: Translucent white non-yellowing 100% virgin acrylic. Fully enclosed. Optional [CLTB] Clear or [OTB] Opaque top, bottom or both. Optional Open [OPTB] top and/or bottom - Indoor Only. Optional [PF] perforated aluminum insert.

Painted Finish: Pre-treated highly durable oven baked polyester powder finish. Corrosion and Weather resistant. Standard [BK] Black, [BZ] Bronze, or [WHT] White. Custom Colors [CC] are available.

Gasketing: High temperature and non-aging neoprene rubber and/or black EPDM completely around the perimeter of the lens and around the rear wire entrance hole. Protects against dust, moisture and outside contamination.

Lens Fasteners: 2 Stainless steel tamperproof screws.

Mounting: Access hole in center for indoor mounting to a J-BOX. For indoor/outdoor use 1/4" Diameter bolts in 4 holes, 5/16" Diameter.

U.L. Listed: Suitable for Wet Locations.

−   Sizes:
11 = 8¼" Width x 11-1/8" Height x 4" Depth
13 = 8¼" Width x 13¼" Height x 4" Depth
16 = 8¼" Width x 16" Height x 5½" Depth
21 = 9¼" Width x 21" Height x 5½" Depth
26 = 12¼" Width x 26¼" Height x 7¼" Depth
41 = 14" Width x 41" Height x 8½" Depth

−   Lamp Types:
BX = Biax Mini-Fluorescent
DBX = Double Biax Mini-Fluorescent
TBX = Triple Biax Mini-Fluorescent
T5 = T5 Miniature Bi-Pin
T5HO = High Output T5 Miniature Bi-Pin
T8 = T8 Medium Bi-Pin  Fluorescent
MH = Metal Halide
MU/MD = Metal Halide Uplight or Downlight-PAR Lamp
QL = Induction QL
LED = Light Emitting Diode
LU/LD = Light Emitting Diode Uplight or Downlight

−   No. of Lamps/Wattages:
11" Lamps/Wattage
DBX = [1-2]13 Watt; [1]18 Watt
LED = 5 Watt
LU/LD = 3 Watt

13" Lamps/Wattage
BX = [2]18 Watt
DBX = [2]13 Watt; [1]26 Watt; [2]26 Watt-CA
TBX = [1]26 Watt; [2]26 Watt-CA; [1]32 Watt; [1]42 Watt-CA
MH = [1]50 Watt-CA
LED = 10 Watt
LU/LD = 3 Watt

16" Lamps/Wattage
BX = [2]18 Watt; [1]24 Watt; [2]24 Watt-CA; [1]27 Watt; [2]27Watt-CA
DBX = [2]13 Watt; [2]18 Watt; [2]26 Watt
TBX = [2]26 Watt; [2]32 Watt-CA; [1]42 Watt
MH = [1]50 Watt-CA; [1]70 Watt-CA
QL = [1]55 Watt-CA
LED = 15 Watt
LU/LD = 3 Watt

21" Lamps/Wattage
BX = [2]18 Watt; [2]24 Watt
DBX = [3]13 Watt-CA; [2]26 Watt
TBX = [2]32 Watt; [2]42 Watt
MH = [1]50 Watt; [1]70 Watt-CA; [1]100 Watt-CA
QL = [1]55 Watt-CA
LED = 15/30 Watt
LU/LD = 3 Watt; 10 Watt

26" Lamps/Wattage
BX = [2]36 Watt; [2]39 Watt; [2]40 Watt; [2]55 Watt
DBX = [3]26 Watt; [4]26 Watt-CA
TBX = [3]26 Watt; [3]32 Watt; [3]42 Watt; [1-2]57 Watt; [1-2]70 Watt
T5 = [1-2]14 Watt; [1-2]24 Watt
T8 = [1-3]17 Watt 
MH = [1-2]50 Watt; [1]70 Watt; [2]70 Watt-CA; [1]100 Watt
MU/MD = [1]39 Watt PAR20; [1]39 Watt PAR30
QL = [1]85 Watt-CA
LED = 40 Watt; 60 Watt
LU/LD = 3 Watt; 10 Watt; 25 Watt

41" Lamps/Wattage
BX = [2-3]36 Watt; [2]39 Watt; [3]39 Watt-CA; [2]40 Watt; [3]40 Watt-CA; [2]50 Watt; [3]50 Watt-CA; [2]55 Watt; [3]55 Watt-CA; [1]80 Watt
DBX = [3-4]26 Watt
TBX = [4]26 Watt; [3]32 Watt; [4]32 Watt-CA; [3]42 Watt-CA; [2]57 Watt; [2]70 Watt
T5 = [1-2]21 Watt; [1-2]39 Watt
T8 = [1-3]25 Watt 
MH = [2]50 Watt; [2]70 Watt-CA; [1]100 Watt
MU/MD = [1]39 Watt PAR30; [1]70 Watt PAR38
QL = [1-2]85 Watt-CA
LED = 80 Watt
LU/LD = 3 Watt; 10 Watt; 25 Watt

−   Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt

−   Ballasts:
EBX = Electronic Ballast
2EBX = Two Electronic Ballast
EBMH = Electronic Ballast for Metal Halide
IND = Induction HF Generator [Specify Voltage]

−   Options:
CA = Aluminum Backbox/Surface Conduit [2" deep]
CLTB = Clear Top & Bottom (Standard with MU/MUD)
CT3 = +/-3000K LED/QL Color Temp
CT4 = +/-4000K LED/QL Color Temp
CT5 = +/-5000K LED/QL Color Temp
CU = Custom Requirements
DIM = Dimming Ballast
EM = Emergency battery (CA required) - Damp Location (Must Specify Voltage)
FUS = Fuse and Fuseholder
H/L = Dual Circuit for High/Low Light Level for LED
LEC3 = LED Emergency Circuit [1] Three Watt
LEC6 =  Emergency Circuit [2] Three Watt
MD = Integral Motion Detector
OTB = Opaque Top & Bottom
OPTB = Open Top & Bottom (indoor only)
PHT1 = Integral Photocell 120V [CA required]
PHT7 = Integral Photocell 277V [CA required]
REM = Remote Emergency Battery (self contained in CA) - Must Specify Voltage
TPD = Tamperproof Screwdriver

−   Painted Finishes:
BK = Black
BZ = Bronze
PA = Painted Aluminum
SV = Silvadillo Gray
WHT = White
CC = Custom Color [Specify RAL#]