Click to Enlarge Image
The Americana Collection
PENDANT
  • Pendant Suspended Mount Under Canopy
  • 3 Available Americana Based Cage Styles  
  • 12" & 24" Stem Length Options
Download: Pendant Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal voltage 120 or 277 Volt, electronic driver.

Cage: Boston Pendant: Standardized .375" or .5" square aluminum bars secured by hidden means to the frame. Standard square extruded bars. Standard configuration shown; custom spacing available. Optional [PF] perforated aluminum insert. Richmond Pendant: Standard Solid Aluminum Shield.

Diffuser: Translucent white non-yellowing 100% virgin acrylic. Standard Open [OPTB] top and/or bottom for indoor use. Optional [CLTB] Clear or [OTB] Opaque top, bottom or both.

Lens Fasteners: 2 Stainless steel tamperproof screws.

Painted Finish: Pre-treated highly durable oven baked polyester powder finish. Corrosion and Weather resistant.

Mounting: Pendant Model Suspension. Specify Stem Length - 12" Stem is Standard.

Compliance: Built according to U.S. and Canadian safety standards. Suitable for Dry and Damp Locations - covered ceiling is required for outdoor installation.

  Series:
BN-PM = Boston Pendant Mount (Based on Boston Series)
CD-PM = Cleveland Pendant Mount (Based on Cleveland Series)
RD-PM = Richmond Pendant Mount (Based on Richmond Series)

  Sizes:
24 = 13" Diameter x 24" Length (Diffuser) 
30 = 13" Diameter x 30" Length (Diffuser) 
36 = 13" Diameter x 36" Length (Diffuser)

  Stem:
12LST = 12" Stem Length (Standard) 
24LST = 24" Stem Length 
CLST = Custom Stem Length

  Lamp Types:
LED = Light Emitting Diode
LU/LD = Light Emitting Diode Uplight or Downlight

  No. of Lamps/Wattages:
Boston/Cleveland Pendant Lamps/Wattages
24" Lamp/Wattages

LED = 60 Watt
LU/LD = 10 Watt / 15 Watt / 25 Watt

30" Lamp/Wattages
LED = 60 Watt
LU/LD = 10 Watt / 15 Watt / 25 Watt

36" Lamps/Wattages
LED = 60 Watt
LU/LD = 10 Watt / 15 Watt / 25 Watt

Richmond Pendant Lamps/Wattages
24" Lamp/Wattages

LU/LD = 10 Watt / 15 Watt / 25 Watt

30" Lamps/Wattages
LU/LD = 10 Watt / 15 Watt / 25 Watt

36" Lamps/Wattages
LU/LD = 10 Watt / 15 Watt / 25 Watt

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Electronic Driver

  Options:
8ACSTEM = Pendant: Aircraft Cable, 3-Point Suspension, 8ft.
- Canopy Included
ANTI-SWAY = Anti-Sway Aircraft Cable
- Requires Multiple Points of Suspension Between Fixtures and Anchors. Does not replace Pendant.
0-10D = 0-10V low-voltage LED Dimming
8DIM = LED Dimming Forward Phase (TRIAC)
9DIM = LED Reverse Phase/Trailing Edge ELV Dimming
11DIM = DALI LED Dimming Driver
12DIM = Lutron Dimming Driver
CB = Opaque Closed Bottom [BN-PM Only]
CLTB = Clear Top & Bottom
CS = Canopy Static [Pendant Mount]
CSW = Canopy Swivel [Pendant Mount]
CT = Opaque Closed Top [Standard with PAR Lamp]
CU = Custom Requirements
DAMP = Damp Location [Includes CT]
EM = Emergency battery (CA required)
- Specify Voltage [120V or 277V]
- Consult Factory for EM Options
FUS = Fuse and Fuseholder
FUS2 = Double Fusing
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
OTB = Opaque Top & Bottom
OPTB = Open Top & Bottom (indoor only)
PF = Perforated Insert [For BN-PM]
PHT1 = Integral Photocell 120V [CA required]
PHT7 = Integral Photocell 277V [CA required]
REM = Remote Emergency Battery
self-contained in CA – Must Specify Voltage [120V or 277V];
Consult Factory for REM Options
TB = Opal Translucent Closed Bottom

  Painted Finishes:
BK = Black
BZ = Bronze
PA = Painted Aluminum
SV =
Silvadillo Gray
WHT = White
CC = Custom Color [Specify RAL#]