Introducing a new line in the Americana Collection, the Monolith luminaire series features an elegant, slim silhouette with a shallow profile that meets ADA requirements equaling or has less than a 4" depth. Each Monolith features a square bar aluminum frame in a variety of styles, one-piece translucent diffuser for soft and even illumination available in several color temperatures, anti-glare perforated aluminum panels, optional up and/or downlight for dramatic wall wash effects. Energy efficient LED comes standard in multiple color temperatures to choose from. The housing is made out of a heavy-duty, fully gasketed construction for weather and vandal resistance whether indoors or outdoors. Its modular design makes it easy to install, relamp and interchange decorative components. You can even custom design your own combination of cage, perforated insert, and colors used to create your very own signature Monolith.
Ballast: 120 or 277 Volt, extreme temp range -30°C to 90°C, HPF electronic ballast [EBX] for FL. Metal Halide: HPF QV/Pulse Start Magnetic Ballast is Standard; Optional Electronic Ballast [EBMH].
Backbox: 16 gauge aluminum. Wire access through .875" diameter knockouts on four sides and back. Water tight. Standard with emergency battery, H.I.D. and some fluorescent models. Optional for surface conduit entry.
Backplate: 16 gauge aluminum
Cage: Standardized 0.5" square aluminum extruded bars secured by hidden means to the frame. Standard configurations shown; custom spacing available. Optional [PF] perforated alum. Insert and/or shield [SSD].
Diffuser: Translucent white non-yellowing 100% virgin acrylic. Fully enclosed. Clear top and bottom [CLTB] is standard with uplight or/and downlight; Optional with other types of lamping. Optional opaque top, bottom or both [OTB]. Optional Open [OPTB] top and/or bottom - Indoor Only.
Gasketing: High temperature and non-aging neoprene rubber and/or black EPDM completely around the perimeter of the lens and around the rear wire entrance hole. Protects against dust, moisture and outside contamination.
Existing Americana Models can be used as additional cage/style options or custom cages can be designed with your choice of diffuser shape, cage bar configuration, and perforated/shield inserts. Consult Factory for Custom Requirements
0-10D = 0-10V Low Voltage LED Dimming CA = Aluminum Backbox/Surface Conduit [2" deep] CLTB = Clear Top & Bottom (Standard with LU/LD) CM = Ceiling Mount (Custom Requirements) CU = Custom Requirements EM = Emergency battery (CA required)
- Specify Voltage [120V or 277V]
- Consult Factory for EM Options FUS = Fuse and Fuseholder DFUS = Double Fuse and Fuseholder GN = Generator Transfer Device H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required) H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds HOR = Horizontal Mount (Consult Factory) MD = Integral Motion Detector (Single Circuit)
-Specify "A" for Steps: 0% - 100% - 0%
-Specify "B" for Steps: xx% - 100% - xx%
-xx% = LOW Level and/or STANDBY Dimmed Levels
Options: 50% / 30% / 20% / 10% OTB = Opaque Top & Bottom OPTB = Open Top & Bottom (indoor only) PHT1 = Integral Photocell 120V [CA required] PHT7 = Integral Photocell 277V [CA required] PHTD = Integral Photocell Dual Voltage 277V [CA required] REM = Remote Emergency Battery
self-contained in CA – Must Specify Voltage [120V or 277V];
Consult Factory for REM Options SSDTB = Aluminum Solid Shield Top / Bottom (No Light) TPD = Tamperproof Screwdriver