Click to Enlarge Image
Additional Images
 
The Commercial Garage Collection

NELLIS

  • Multi-Purpose LED Pendant Luminaire
  • Built-in Heat Sink for Optimal Heat Dissipation
  • Dimming/Motion Sensor Options Available
Download: Nellis Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120/277V [UNV] standard. Dimming optional.

Diffuser: Standard clear acrylic prismatic dome lens for exceptional light distribution. Optional frost acrylic or polycarbonate prismatic domed lenses.

Finish: Polyester powder coat White [WHT] is Standard. Optional Black [BK], Bronze [BZ], Painted Aluminum [PA] For custom colors, please consult factory.

Gasketing: High temperature, non-aging black EPDM gasketed seals. Seals diffuser to housing to protect against outside contaminants.

Housing: Single piece precision die cast aluminum.

Lamp: Super Bright Light Emitting Diode.

Mounting:
STYLE A: External Driver with 3” Static Stem to J-BOX.
STYLE B: Surface Mount Box with 4-Point Mounting with 3” Static Stem.
STYLE C: Rapid Mount Box XL with 3” Static Stem.
NOTE: Style B/Style C mounting boxes are used
for housing drivers and optional components.

Stem: ½" NPT galvanized and powder coated, 12" long stem standard. Consult factory for custom stem lengths.

Weight:
 Nellis [16lbs].

Compliance: Built according to UL1598 & UL8750 compliance for UL/ULC U.S. and Canadian Safety Standards. Suitable for Wet Locations. IP65 Tested and Rated.

  Series:
NS = Nellis Series (13¾" Diameter x 8.65" Depth)

  Mounting:
A = External Driver with 3" Static Stem to J-BOX
B = Surface Mount Box with 4-point mounting with 3" Static Stem
C = Rapid Mount Box XL with 3" Static Stem

  Reflector / Diffuser:
UPL = 12% Uplight (Specular Reflector System)
Note: If UPL is selected, Skip Diffuser Options
PCD = Prismatic Clear Polycarbonate Diffuser (Type V)
PAFD = Prismatic Frosted Acrylic Diffuser

  LED Wattages
LED35 = 35 Watt Light Emitting Diode
LED55 = 55 Watt Light Emitting Diode
LED75 = 75 Watt Light Emitting Diode
LED100 = 100 Watt Light Emitting Diode

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp

  Voltage:
347 = 347 Volts
480 = 480 Volts
UNV = 120~277 Universal Volt (0-10V Low Voltage Dimming is Standard)

  Options:

0-10D = 0-10V Low Voltage Dimming (100-30% Standard)
11DIM = DALI LED Dimming (Style B / Style C Only)
12DIM = Lutron LED Dimming (Style B / Style C Only)
13DIM = LED Step Dimming (Style B / Style C Only)
BPS = Bird Preventative Shield for Pendant Mount
EM = Internal Emergency Battery
-Consult Factory for Wattages
FUS = Fuse and Fuseholder
FUS2 = Double Fusing
H/L1 = High/Low LED Light Level
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low LED Light Level
-Wired for Dual AC Input Feeds
HSS = House Side Shield External (120° Standard)
IHS = Inside House Side Shield External (120° Standard)
MD = Internal Motion Detector (Single Circuit)
- Specify "A" for Steps: 0% - 100% - 0%
- Specify "B" for Steps: xx% - 100% - xx%
- xx% Options: 50% / 30% / 20% / 10%
PM = Pendant Mount with Stem
-12" Length Standard
-Specify Canopy: CS = Canopy Static / CSW = Canopy Swivel
SU = 10KA Surge Protection for LED (ANSI C62.41)
TP = Stainless Steel Tamper Proof Locking Screws
TPD = Tamperproof Screwdriver
10W = 10 Year Limited Warranty


  Painted Finishes:
WHT = White (Standard)