Click to Enlarge Image
The Dark Sky Collection
ALAMEDA
  • Trapezoidal Aluminum Durable Case
  • Weather and Vandal Resistant Design 
  • Full-Cutoff Dark Sky® Compliant Luminaire
Download: Alameda Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Backplate: Cast Aluminum.

Driver: [UNV] Universal Voltage 120/277 electronic driver is standard.

Finish: Oven Baked Polyester Powder Coat. Standard Finish - Bronze.

Housing: Heavy wall cast aluminum with wire access on back through threaded .5" conduit size entrance holes; Gasketed.

Lamp: [LED] Light Emitting Diode.

Lens: Standard Clear Tempered Glass.

Lens Fasteners: Stainless steel tamperproof screws [2] to secure lens in place.

Reflector: .032 prescription specular aluminum for high efficiency and reduction in arc tube voltage rise.

Compliance: Built according to U.S. and Canadian safety standards. Suitable for Wet Locations. CSA Listed.

NOTE: *For Dimming and Emergency Options refer to Dimming Ballast Table and Emergency Battery Table.

  Series:
AM-9 = Alameda 9" Wide Series
AM-14 = Alameda 14" Wide Series
AM-18 = Alameda 18" Wide Series

Sizes:
AM-9 = 9" Width x 9" Height x 10" Depth
AM-14 = 14" Width x 9" Height x 11" Depth 
AM-18 = 18" Width x 9" Height x 14" Depth

Distribution:
* Must Specify Distribution Style
FT =
Forward Throw
WT = Wide Spread Throw

Lamp Types:
LED = Light Emitting Diode

  Max No. of Lamps/Wattages:
AM-9 LED Wattages
LED20 = 20 Watt
LED22 = 22 Watt
LED25 = 25 Watt

AM-14 LED Wattages
LED37 = 37 Watt
LED40 = 40 Watt
LED50 = 50 Watt
LED60 = 60 Watt

AM-18 LED Wattages
LED40 = 40 Watt
LED50 = 50 Watt
LED60 = 60 Watt

  Color Temperature:
AMB = Amber - 585-595 nanometers
-*AMB is Wildlife / Beachfront / Turtle-Safe Compliant
-*AMB for Alameda 9" (AM-9) - LED22 Only
-*AMB for Alameda 14" (AM-14) - LED37 Only
CT27 = +/-2700K LED Color Temp
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Driver (Must Specify Voltage for EM Option)
2UNV = Two 120~277 Universal Volt Drivers (Must Specify Voltage for EM Option)

  Options:
0-10DIM = 0-10V Low Voltage LED Dimming
EM = Integral Emergency Battery (Consult Factory)
FUS = Fuse and Fuseholder
FUS2 = Double Fuse
GN = Generator Transfer Device
H/L1 = High/Low LED Light Level
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low LED Light Level
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector (Single Circuit)
-Specify "A" for Steps: 0% - 100% - 0%
-Specify "B" for Steps: xx% - 100% - xx%
-xx% = LOW Level and/or STANDBY Dimmed Levels
Options: 50% / 30% / 20% / 10%
PG = Prismatic Glass No Glare Lens
PHTD = Integral Photocell Dual Voltage 120/277V
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for Options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

  Painted Finishes:
PA = Painted Aluminum 
BK = Black
BZ = Bronze - STANDARD
WHT = White