Click to Enlarge Image
The Dark Sky Collection
ANTIOCH
  • Quarter Round Spherical Case
  • Weather and Vandal Resistant Design 
  • Full-Cutoff Dark Sky® Compliant Luminaire
Download: Antioch Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:

Housing: Two piece precision die cast aluminum housing with supplied with stainless steel hardware. Available in small and large depending on wattage and lumen output selected.

Lens: Impact resistant borosilicate glass lens secured with stainless steel hardware.

Finish: Chip and fade resistant powder coat finish.

Finish: Mounts to standard 4” square electrical junction boxes. Alternate junction box mounting possible via universal mounting ring for post and bollard mounting. Three ½” trade size threaded KOs provided in housing for surface mounting option with surface conduit (by others). Ingress resistant gasket included.

Driver: High temperature rated, universal voltage 120 or 277 Volt driver is standard. Dimmable driver available. Consult factory for alternate voltages and dimmable options.

Photocell: (Optional) Industrial Grade Dual Voltage Photocell. Specify 120V or 277V..

COMPLIANCE: Built according to US & Canadian Safety Standards. Suitable for outdoor Wet locations. IP67 Tested and Rated.


  Series:
AT = Antioch Series

  Distribution:
* Must Specify Distribution Style
FT =
Forward Throw
WT = Wide Spread Throw

  LED Wattages:
LED20 = 20 Watt LED (2600 Initial Lumens)
LED30 = 30 Watt LED (3900 Initial Lumens)
LED40 = 40 Watt LED (5200 Initial Lumens)

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Driver (Must Specify Voltage for EM Option)
2UNV = Two 120~277 Universal Volt Drivers (Must Specify Voltage for EM Option)

  Options:
0-10D = 2" Deep Aluminum Backbox/Surface Conduit
DIM = Dimming Driver (Consult Factory for Options)
DIM = Dimming Driver (Consult Factory for Options)
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; Consult Factory for Options)
FUS = Fuse and Fuseholder
FUS2 = Double Fuse
GN = Generator Transfer Device
H/L1 = High/Low LED Light Level
-Single AC-Input feed / Switch Sensor (Required)
H/L2 = High/Low LED Light Level
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector
-Specify "A" for Single Circuit: All-On / All-Off
-Specify "B" for Single Circuit: Half-on / Half-Off
MDX = External Motion Detector
-Specify "A" for Single Circuit: All-On / All-Off
-Specify "B" for Single Circuit: Half-on / Half-Off
(Finished in White [WHT] or Bronze [BZ])
PHTD = Integral Photoecell Dual Voltage 120/277V [Required CA]
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for Options)
SU = Surge Protection for LED Fixtures

  Painted Finishes:
PA = Painted Aluminum 
BK = Black
BZ = Bronze
WHT = White