Click to Enlarge Image
The Dark Sky Collection
ASPEN
  • Trapezoidal Aluminum Durable Case
  • Weather and Vandal Resistant Design 
  • Full-Cutoff Dark Sky® Compliant Luminaire
Download: Aspen Spec-Sheet  
*Click +/- to expand/collapse information
  Product Specifications:
Backplate: Cast Aluminum.

Driver: Universal Voltage 120~277V Electronic Driver.

Finish: Oven baked [BZ] bronze polyester powder finish.

Gasketing: High temperature black EPDM and neoprene rubber concealed in housing pocket & enclosed by cast in drip shield and rear wire entrance hole protects against dust, moisture and outside contamination.

Housing: Heavy wall cast aluminum with wire access on back through threaded .5" conduit size entrance hole; Gasketed.

Lamp: [LED] Light Emitting Diode.

Lens: Standard .187" Clear Tempered Glass.

Lens Fasteners: Stainless steel tamperproof screws - [2] To secure lens in place.

Reflector: .032 prescription specular aluminum for high efficiency and reduction in arc tube voltage rise.

Compliance: Built to comply with U.S. and Canadian Standards. Suitable for Wet Locations.

NOTE: *For Dimming and Emergency Options, please Consult Factory.

  Series:
AS = Aspen Series

  Distribution:
* Must Specify Distribution Style
FT =
Forward Throw
WT = Wide Spread Throw

  Max No. of Lamps/Wattages:
LED30 = 30 Watt LED
LED40 = 40 Watt LED
LED50 = 50 Watt LED

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Electronic Driver
(Must Specify Voltage for EM Option)
2UNV = Two 120~277 Universal Volt Electronic Drivers
(Must Specify Voltage for EM Option)

  Options:
C = K12 Prismatic Polycarbonate Lens .125" Thick
D = K12 Prismatic Polycarbonate Lens .156" Thick
J = Clear Polycarbonate Lens .187" Thick
K = C73 Prismatic Tempered .156" Glass Lens
N = .187" Clear Tempered Glass - Standard
CA = 3.125" Aluminum Backbox/Surface Conduit
0-10D = 0-10V Low Voltage Dimming
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Consult Factory for Options)
FUS = Fuse and Fuseholder
FUS2 = Double Fuse
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
SU = Surge Protection for LED Fixtures

  Painted Finishes:
PA = Painted Aluminum 
BK = Black
BZ = Bronze
WHT = White