Click to Enlarge Image
The Dark Sky Collection
  • Wide Semi-Curved Aluminum Decorative Shield 
  • Weather and Vandal Resistant Design 
  • Standard Energy Efficient LED
Download: Boulder Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Electronic Driver: Universal Voltage 120-277 Volt [UNV]

Emergency: Integral or Remote LED Emergency Battery.

Gasketing: High temperature, non-aging black EPDM and/or Neoprene Rubber concealed in housing pocket and enclosed by cast-in drip shield and rear wire entrance hole to protect against outside contaminants.

Housing: Heavy wall cast aluminum with wire access on four sides and back through threaded 1/2" conduit size entrance holes- Finished in Bronze oven baked Polyester Powder Coat.

Light Engine: Light Emitting Diode

Lens: UV stabilized 1/8" thick injection molded clear prismatic Hi-impact Polycarbonate.

Lens Fasteners: Stainless steel tamperproof screws - [4] To secure lens in place.

Mounting: Wall.

Reflector: .032 aluminum painted white with high reflectivity.

Shield: 0.063" aluminum Rounded or Triangular Fascia. Standard window opening, optional Solid Front [SF]. Standard Solid Top.

Compliance: Built to comply with U.S. and Canadian safety standards. Suitable for Wet Environments.

BO = Boulder Series

A = Round Shield - Window Opening
B = Triangular Shield - Solid Front
C = Rounded Shield - Solid Front

  Max No. of Lamps/Wattages:
LED Uplight/Downlight Wattages
LU15/LD15 =
 15 Watt LED Uplight / 15 Watt LED Downlight
LU20/LD20 = 20 Watt LED Uplight / 20 Watt LED Downlight
LU25/LD25 = 20 Watt LED Uplight / 20 Watt LED Downlight

LED Downlight Only Wattages
LD30 =
 30 Watt LED Downlight
LD40 = 40 Watt LED Downlight
LD50 = 50 Watt LED Downlight

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT6 = +/-6000K LED Color Temp

120 = 120 Volts
277 = 277 Volts
UNV = 120~277V Universal Volt Electronic Driver

  Painted Finishes:
PA = Painted Aluminum 
BK = Black
BZ = Bronze (Standard)
CC = Custom Color
WHT = White


10/90 = 10% Uplight / 90% Downlight
DK = Dark Sky Cover (No Uplight)
FUS = Fuse and Fuseholder
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector (Single Circuit)
-Specify "A" for Steps: 0% - 100% - 0%
-Specify "B" for Steps: xx% - 100% - xx%
-xx% = LOW Level and/or STANDBY Dimmed Levels
Options: 50% / 30% / 20% / 10%
-Maximum Mounting Height is 10 Feet
PHTD = Integral Photocell Dual Voltage 120/277V
SU = Surge Protection for LED Fixtures
TBU = Tight Beam Uplight
TPD = Tamperproof Screwdriver

See Spec-sheet for List of Emergency Battery Options