Click to Enlarge Image
The Dark Sky Collection
BREA
  • Tapered Rectangular Aluminum Durable Case
  • Weather and Vandal Resistant Design
  • Full-Cutoff Dark Sky ® Compliant Luminaire
Download: Brea Spec-Sheet
*Click +/- to expand/collapse information
Product Specifications:
Backplate: Cast Aluminum.

Ballast: 120 or 277 Volt, extreme temp range -30°C to 90°C, HPF electronic ballast [EBX] for FL. For HID Pulse Start is Standard.

Finish: Oven baked [BZ] bronze polyester powder finish.

Gasketing: High temperature black EPDM and neoprene rubber concealed in housing pocket & enclosed by cast in drip shield and rear wire entrance hole protects against dust, moisture and outside contamination.

Housing: Heavy wall cast aluminum with wire access on back through threaded .5" conduit size entrance hole; Gasketed.

Lamp: [DBX] Double Biax, [TBX] Triple Biax, [MH] Metal Halide; [LED] Light Emitting Diode.

Lens: Standard .187" Clear Tempered Glass.

Lens Fasteners: Stainless steel tamperproof screws - [2] To secure lens in place.

Reflector: .032 prescription specular aluminum for high efficiency and reduction in arc tube voltage rise.

U.L. Listed: Suitable for Wet Locations.

NOTE: *For Dimming and Emergency Options refer to Dimming Ballast Table and Emergency Battery Table.

  Series:
BA = Brea Series

Sizes:
BA = 14½" Width x 9¼" Tall x 8½" Depth 

Distribution:
* Must Specify Distribution Style
FT =
Forward Throw
WT = Wide Spread Throw

  Lamp Types:
DBX = Double Biax Mini-Fluorescent
TBX = Triple Biax Mini-Fluorescent
MH = Metal Halide
LED = Light Emitting Diode

  Max No. of Lamps/Wattages:
DBX = [1]26 Watt
TBX = [1]32 Watt; [1]42 Watt
MH = [1]50 Watt; [1]70 Watt; [1]100 Watt
LED = 20 Watt; 30 Watt

  Color Temperature:
CT3 = +/-3000K LED/QL Color Temp
CT4 = +/-4000K LED/QL Color Temp
CT5 = +/-5000K LED/QL Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

  Ballasts:
EBX = Electronic Ballast
EBMH = Electronic Ballast for MH
HPF = High Power Factor for MH

  Options:
N = .187" Clear Tempered Glass - Standard
DIM = Dimming Ballast (*Refer to DIM Table for Options)
FUS = Fuse and Fuseholder
GN = Generator Transfer Device
H/L = Dual Circuit for High/Low Light Level for LED
LEC5* = LED Emergency Circuit [1] Five Watt
LEC10* =  Emergency Circuit [2] Five Watt
*Must Specify Voltage for incoming EM Circuit [by others]
A = 12VDC; B = 120VAC; C = 24VDC; D = 277VAC
MD = Integral Motion Detector - Specify "A" for single circuit-all on, all off; "B" for dual circuit, half on half off

MDX = External Motion Detector - Specify "A" for single circuit-all on, all off; "B" for dual circuit, half on half off
(Specify Finish: Bronze or White)
PHT1 = Integral Photocell 120V
PHT7 = Integral Photoecell 277V
QR = Quartz Restrike Relay [120V] Lamp by Others
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Refer to EM Table for options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

  Painted Finishes:
PA = Painted Aluminum 
BK = Black
BZ = Bronze
SV = Silvadillo
WHT = White