Click to Enlarge Image

The High Abuse Bi-Pin Fluorescent Collection
GL
  • Low Bay/Aisle LED Lighting 
  • Built-In Cooling Fins
  • Simple Installation/Easy Maintenance 
Download:  GL Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Application: Parking garages, industrial and commercial low bay and aisle lighting, stairwells, natatoriums and hazardous applications.

Natatoriums: Flat, Sanded, Tempered, Pattern 73 Glass, Silicon Gasketing and Conformal Coating to fixture both inside and exterior is Optional.

Reflector: Specular Aluminum.

Mounting: Two stainless steel mounting brackets for easy installation. Optional Pendant Mount, 2 Steams; 0°/30°/45° Rotation

Gasket: Fully gasketed enclosure suitable for IP 66 and Class I Div. II hazardous locations.

Housing: Die Cast A380 Aluminum housing enclosure with cooling fins. Conduit knock-out holes in both ends of casting. Accommodates occupancy sensors or other controls.

Lens: Acrylic [Standard], Optional Polycarbonate and Glass lenses.

Thermal Management: Copper Cooled Components (Patent Pending). Up to 60 Watt Rated for 47°C Operating Temp. 24/7 Duty Cycle

Compliance: Built according to U.S. and Canadian Safety Standards. Suitable for Wet Environments. IP65 Tested and Rated.

Warranty: 5 Years is Standard. For Extended Warranties, Consult Factory.

  Series:
GL = Garage Linear Light Series

  Lens:
AC = Drop Clear Acrylic [Standard]
FA = Drop Frosted Acrylic
PC = Drop Clear Polycarbonate
PCF = Drop Frosted Polycarbonate
CG = Drop Clear Prismatic Glass
D = Flat Lens: Prismatic Polycarbonate [.156" K12]
J = Flat Lens: Clear Polycarbonate [.187"]
K = Flat Lens: Prismatic Tempered Glass [.156" C73]

  Lamps Type/Wattage:
LED40 = Light Emitting Diode 40 Watt
LED50 = Light Emitting Diode 50 Watt
LED60 = Light Emitting Diode 60 Watt
LED80 = Light Emitting Diode 80 Watt

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp

  Voltage:
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

  Options:
0-10D = 0-10V Low-Voltage LED Dimming
FUS = Fuse and Fuseholder
H/L = Dual Circuit, High/Low LED Light Level
MD = Motion Detector - Specify "A" for single circuit-all on, all off; "B" for dual circuit, half on half off
NAT = Natatorium Epoxy Coated Finish and Conformal Coated Light Engines
PM1 = Pendant Mount: 1 Stems, Non-Rotatable
PM2 = Pendant Mount: 2 Stems, Rotatable
QMB = Quick Mount Galvanized "J" Box(s) - Install in Half the Time
TPD = Tamperproof Screwdriver
SWB = Swivel

  Finishes:
WHT = White
BK = Black Finish
BZ = Bronze
PA = Painted Aluminum
CC = Custom Color