Click to Enlarge Image

Additional Images
The High Abuse HID Collection
H31 | H33
  • Drop-Square / Flat Prismatic Polycarbonate Lens
  • Weather & Vandal Resistant Design
  • Wall or Ceiling Mounted 
Download: H31 | H33 Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120~277 Volt Electronic Driver is Standard.

Finish: Over baked polyester powder coat.

Gasketing: High temperature anti-aging black EPDM and/or neoprene rubber concealed in housing pocket, with cast-in drip shield enclosure and rear wire entrance hole protecting against outside contamination.

Housing: Heavy wall cast aluminum with wire access on 4 sides and back thru threaded .5" conduit size entrance holes.

Lamping: [LED] Light Emitting Diode.

Lens: H31: .125" thick UV stabilized injection molded clear prismatic high impact polycarbonate. H33: Standard Drop Straight Side Diffuser with Optional Drop Tapered Side Diffuser [DT].

Lens Fasteners: 4 stainless steel tamperproof screws to secure lens to backplate.

Reflector: .032" textured aluminum high efficient and reduces arc tube voltage rise.

Compliance: Built to comply with U.S. and Canadian safety standards. Suitable for Wet Locations.

  Series:
H31 = H31 Series
H33 = H33 Series (with Glass Lens Only)

  Sizes:
H31 = 12¾" Square x 7½" Depth
H33 = 12¾" Square x 4½ Depth

  Max No. of Lamps/Wattages:
LED30 = 30 Watt LED
LED40 = 40 Watt LED
LED50 = 50 Watt LED

  LED Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Electronic Driver

  Lens Options:
*Lens Options for H33 ONLY

C =
.125" Thick K12 Prismatic Polycarbonate Flat Lens - STANDARD [H33 Only]
D = .156" Thick K12 Flat Prismatic Lens [H33 Only]
G = .156" Clear Tempered Glass [H33 Only]
K = .156" Thick C73 Prismatic Tempered Glass Lens [H33 Only]

  Options:
0-10D = 0-10V Low Voltage LED Dimming
8DIM = LED Dimming Forward Phase (TRIAC)
DT = Drop Tapered Sides Diffuser [H31 Only]
FUS = Fuse and Fuseholder
FUS2 = Double Fusing
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
PHTD = Integral Photocell Dual Voltage 120/277V
QMB = Quick Mount Galvanized "J" Box
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for REM Options)
SU = Surge Protection for LED Fixtures
TMB = Trunnion Mount Bracket
TPD = Tamperproof Screwdriver

  Painted Finishes:
BK = Black
BZ = Bronze (Standard)
PA = Painted Aluminum
WHT = White
CC = Custom Color