Click to Enlarge Image

Additional Images
The High Abuse Mini-Fluorescent Collection
E31 | E33
  • Square Aluminum Cast Housing with Polycarbonate Lens
  • Weather & Vandal Resistant Design
  • Wall or Ceiling Mounted 
Download:  E31 | E33 Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120~277 Volt extreme temp range -30°C to 90°C, electronic driver.

Finish: Bronze oven baked polyester powder coat finish.

Gasketing: High temp anti-age black EPDM and/or neoprene rubber around lens perimeter and rear wire entrance hole, protects from dust, moisture and outside contamination.

Housing: Heavy wall cast aluminum with wire access on 4 sides and back through 1/2" conduit size entrance holes.

Lamping: Energy Efficient Light Emitting Diode [LED].

Lens: E31: UV stabilized .125" thick injection molded clear prismatic high impact polycarbonate with smooth outside and internal collector and refractor prisms for high efficiency, low brightness and wide S/MH ratios.
E33: .125" thick prismatic polycarbonate [80].

Lens Fasteners: 4 stainless steel tamperproof screws to secure lens in place.

Reflector: .032 textured aluminum for high efficiency and reduction in arc tube voltage rise.

Compliance: Built according to U.S and Canadian safety standards. Suitable for Wet Locations.

NOTE: *For Dimming and Emergency Options, please Consult Factory.

E31 = E31 Drop Straight Sides Diffuser Series
E33 = E33 Flat Lens Series

E31 = 12¾" Square X 7½" Depth
E33 = 12¾" Square x 4½" Depth

  LED Wattages:
LED25 = 25 Watt LED
LED35 = 35 Watt LED
LED40 = 40 Watt LED

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

120 = 120 Volts
277 = 277 Volts
347 = 347 Volts (required CA or CSTB)
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

C = .125" thick K12 Prismatic Polycarbonate Lens
J = Clear Polycarbonate Lens .187" thick [E33]
K = .156" thick C73 Prismatic Tempered Glass Lens
CA = Conduit Adapter Back Box - For Use with Integral Emergency Battery
0-10D = 0-10V Low Voltage LED Dimming
8DIM = LED Dimming Forward Phase (TRIAC)
DT = Drop Tapered Sides Diffuser (E31 Only)
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Consult Factory for EM Options)
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
PHTD = Integral Dual Voltage Photocell 120~277V
PM = Pendant Mount (12" Stem Standard)
CS = Canopy Static (For Use with Pendant Mount)
CSW = Canopy Swivel (For Use with Pendant Mount)
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for REM options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver
WM = Wall Mount for E31

  Painted Finishes:
BK = Black
BZ = Bronze
WHT = White
PA = Painted Aluminum
SV = Silvadillo
CC = Custom Color