Click to Enlarge Image

Additional Images
 
The High Abuse Mini-Fluorescent Collection
W2-14 | W2-18 | W2-18D
  • Slanted Cutoff Housing with Polycarbonate Lens
  • Weather & Vandal Resistant Design
  • Wall or Ceiling Mounted 
Download: W2-14 | W2-18 | W2-18D Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120~277 Volt, extreme temp range -30°C to 90°C, electronic driver.

Finish: Textured bronze oven baked polyester powder coat finish.

Gasketing: High temp anti-age black EPDM and/or neoprene rubber around lens perimeter and rear wire entrance hole, protects from dust, moisture and outside contamination.

Housing: Heavy wall cast aluminum with wire access on 2 sides, top and back through 1/2" conduit size entrance holes.

Housing Options: Available as Down Light Only [DS] to preserver true Dark Sky; Vandal Resistant features enhanced with Wire Guard [WG] or Clear Polycarbonate Guard [CPG].

Lamping: Energy Efficient Light Emitting Diode [LED].

Lens: Borosilicate molded glass.

Reflector: .032 textured aluminum for high efficiency and reduction in arc tube voltage rise.

Compliance: Built according to U.S. and Canadian safety standards. All Models IP65 Rated. Complies with Buy American Act.

NOTE: *For Dimming and Emergency Options, please Consult Factory.

  Series:
W2-14 = W2 Series - 14" Wide
W2-18 = W2 Series - 18" Wide
W2-18D = W2 Deep Series - 18" Wide

  Sizes:
W2-14 = 14½" Width x 9¼" Height x 7½" Depth
W2-18 = 18¼" Width x 9¼" Height x 9½" Depth
W2-18D = 18¼" Width x 9¼" Height x 12¾" Depth

  LED Wattages:
W2-14 Series Lamps/Wattages
LED30 = 30 Watt LED

W2-18 / W2-18DSeries Lamps/Wattages
LED40 = 40 Watt LED
LED60 = 60 Watt LED

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts (Consult Factory)
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

  Options:
0-10D = 0-10V Low Voltage LED Dimming
8DIM = LED Dimming Forward Phase (TRIAC)
CPG = Clear Polycarbonate Guard
DS = Dark Sky/Full Cut-Off - Down Light Only [NOT Available for W2-14]
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Consult Factory for Options)
FUS = Fuse and Fuseholder
FUS2 = Double Fusing
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
PHTD = Dual Voltage Integral Photocell 120/277V
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for Options)
TPD = Tamperproof Screwdriver
SCO = Side Cut-Off
SU = 10KA Surge Protection for LED Fixtures (meets ANSI spec C62.41.2)
WG = Stainless Steel Wire Guard

  Painted Finishes:
BK = Black
BZ = Bronze (Standard)
PA = Painted Aluminum
WHT = White
SV = Silvadillo
CC = Custom Color