Click to Enlarge Image

The High Abuse Mini-Fluorescent Collection
WP (Wall Pack Series)
  • Sleek Low Profile Housing
  • Weather & Vandal Resistant Design
  • Wall Mounted 
Download: WP Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Backplate: Die cast aluminum.

Driver: Universal Voltage 120~277V Electronic Driver is standard.

Gasketing: High temperature, non-aging black EPDM and/or neoprene rubber concealed in housing pocket and enclosed by cast-in drip shield and rear wire entrance hole to protect against outside contaminants.

Housing: Die cast aluminum with concealed mounting plate. Standard finish is Bronze oven baked Polyester Powder Coat.

Lens: Clear Prismatic Polycarbonate Lens.

Lamping: Energy Efficient Lighting Emitting Diode.

Reflector: .032 Prescription Specular aluminum for high efficiency and reduce arc tube voltage rise.

Compliance: Built according to U.S. and Canadian safety standards. Suitable for Wet Locations.

NOTE: *For Dimming and Emergency Options, please Consult Factory.

  Series:
WP = Wall Pack Series

  LED Wattages:
LED20 = 20 Watt LED
LED40 = 40 Watt LED

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp

  Voltage:
347 = 347 Volts (Consult Factory)
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

  Options:
0-10D = 0-10V Low Voltage LED Dimming
DS = Dark Sky Visor [DLC]
FUS = Fuse and Fuseholder
FUS2 = Double Fusing
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
PHTD = Dual Voltage Integral Photocell 120/277V
REM = Remote Emergency Battery (Must Specify Voltage [120V or 277V]; *Consult Factory for REM Options)

  Painted Finishes:
BZ = Bronze (Standard)
CC = Custom Color