Click to Enlarge Image

Additional Images
 
The Indoor Collection
MOONGLOW
  • Hinged Frame with Easy Access Clips
  • 2 Diameter Size Options Available
  • Wall or Ceiling Mount
Download: Moonglow Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120/277V Electronic Driver.

Hardware: One trade size universal junction box strap with threaded nipple with ground wire. Also supplied four plastic anchors for four point mounting option. Torx Center Pin Reject, Tamper Proof Screws supplied for secure lockup.

Diffuser: Injection molded opal white polycarbonate lens.

Finish: Ivory White.

Lamping: Super Bright White LED.

Housing Pan: Injection molded ABS plastic housing with hinged lens frame with built-in concealed gasketing.

Mounting: Surface Ceiling or Surface Wall Mounted. Comes supplied with junction box strap and threaded nipple. Also supplied with optional 4-point mounting. Pendant Mounting available with 12" Stem.

Emergency: Surface mounted emergency battery packs available for indoor use or internal emergency battery for indoor/outdoor settings. (Consult Factory for Specifications)

Dimming: Two wire terminations for 0-10V dimmers. Optional compatibility with two wire resistance and PWM Dimming.

Compliance: Built according to U.S. and Canadian Safety Standards. Suitable for Damp or Wet Locations. Complies with Buy American Act.

  Series:
MG = Moonglow Series

  Sizes:
Moonglow Small Series 
----------------------------------------------------------------------------------
MG-S =
13¾" Diameter x 5¼" Depth

Moonglow Large Series
----------------------------------------------------------------------------------
MG-L =
17" Diameter x 5¼" Depth

  Max No. of Lamps/Wattages:
Moonglow Small Lamps/Wattages
----------------------------------------------------------------------------------
LED20 = 20 Watt Light Emitting Diode

Moonglow Large Lamps/Wattages
----------------------------------------------------------------------------------
LED30 = 30 Watt Light Emitting Diode

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp

  Voltage:
UNV = 120~277 Universal Volt (Must Specify Voltage for EM Option)

  Options:
0-10D= 0-10V Low-Voltage LED Dimming
FUS = HLR/GLR Fuse and Fuseholder
MD = Integral Motion Detector - Specify "A" for single circuit-all on, all off; "B" for dual circuit, half on half off
PEND = Pendant Mount (12" Stem) - Consult Factory for Custom Stem Lengths
EM = Emergency battery (CA required) 4W or 20W - Damp Location (Must Specify Voltage [120V or 277V]; *Consult Factory for EM Options)
REM = Remote Emergency Battery 4W or 20W
self-contained in CA – Must Specify Voltage [120V or 277V];
*Consult Factory for REM Options

  Painted Finishes:
WHT = White (Standard)