Click to Enlarge Image

Additional Images
   
The North American Collection
WISCONSIN OVAL SERIES
  • Durable Oval Polycarbonate Diffuser 
  • 4 Decorative/Interchangeable Cage Options 
  • 3 Available Depth Size Series
  • Qualifies Under Provisions for the "Buy American Act"
Download: Wisconsin Oval 4" Series Spec-Sheet
                    Wisconsin Oval 6" Series Spec-Sheet
                    Wisconsin Oval 8" Series Spec-Sheet
*Click +/- to expand/collapse information
−   Product Specifications:
Ballast: 120 or 277 Volt, extreme temp range -30°C to 90°C, HPF electronic ballast [EBX] for FL.

Diffuser: Injection molded polycarbonate opal white is standard. Ribbed clear prismatic polycarbonate is optional.

Finish: Oven baked polyester powder finish super durable.

Lens Fasteners: 4 Stainless steel tamperproof screws to secure diffuser in place.

Gasketing: One piece die cut .1875" thick black EPDM or neoprene rubber protects against dust, moisture and outside contamination.

Housing: Cast Aluminum.

Lamp: [DBX] Double Biax, [TBX] Triple Biax, [LED] Light Emitting Diode.

Mounting: 4 .3125" diameter holes for .25" diameter bolts.

Reflector: .032 aluminum for high efficiency.

U.L. Listed: Suitable for Wet Locations with 4 point mounting.

NOTE: *For Dimming and Emergency Options refer to Dimming Ballast Table and Emergency Battery Table.

−   Series:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
BK-4 = Brookfield 4" Deep Series
DE-4 = Darien 4" Deep Series
FM-4 = Fremont 4" Deep Series
RA-4 = Racine 4" Deep Series

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
BK-6 = Brookfield 6½" Deep Series
DE-6 = Darien 6½ Deep Series
FM-6 = Fremont 6½ Deep Series
RA-6 = Racine 6½ Deep Series

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
BK-8 = Brookfield 8" Deep Series
DE-8 = Darien 8" Deep Series
FM-8 = Fremont 8" Deep Series
RA-8 = Racine 8" Deep Series

−   Sizes:
Wisconsin Oval 4" Series = 13¾" Width x 10" Tall x  4" Depth
Wisconsin Oval 6" Series = 13¾" Width x 10" Tall x 6½" Depth
Wisconsin Oval 8" Series = 13¾" Width x 10" Tall x 8" Depth

−   Lamp Types:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
DBX = Double Biax Mini-Fluorescent
TBX = Triple Biax Mini-Fluorescent
LED = Super Bright White Light Emitting Diode

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
DBX = Double Biax Mini-Fluorescent
TBX = Triple Biax Mini-Fluorescent
LED = Super Bright White Light Emitting Diode

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
DBX = Double Biax Mini-Fluorescent
TBX = Triple Biax Mini-Fluorescent
MH = Metal Halide
LED = Super Bright White Light Emitting Diode

−   Max No. of Lamps/Wattages:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
DBX = [1-2]13 Watt; [1]26 Watt
TBX = [1]26 Watt; [1]32 Watt
LED = 15 Watt

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
DBX = [1-2]13 Watt; [1-2]26 Watt
TBX = [1-2]26 Watt; [1-2]32 Watt; [1]42 Watt
LED = 20 Watt; 40 Watt

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
DBX = [1-2]26 Watt 
TBX = [1-2]26 Watt; [1-2]32 Watt; [1]42 Watt
MH = [1]50 Watt; [1]70 Watt
LED = 20 Watt; 40 Watt

−   Voltage:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
120 = 120 Volts
277 = 277 Volts
UNV = 120~277 Universal Volt

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
QV = Quad Volt [120/208240/277]
UNV = 120~277 Universal Volt

−   Ballasts:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
EBX = Electronic Ballast
2EBX = Two Electronic Ballast

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
EBX = Electronic Ballast
2EBX = Two Electronic Ballast

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
EBX = Electronic Ballast
2EBX = Two Electronic Ballast
EBMH = Electronic Ballast for MH
HPF = High Power Factor for MH

−   Options:
Wisconsin Oval 4" Series
----------------------------------------------------------------------------------
CT3 = +/-3000K LED/QL Color Temp
CT4 = +/-4000K LED/QL Color Temp
CT5 = +/-5000K LED/QL Color Temp
DIM = Dimming Ballast (*Refer to DIM Table for Options)
FRC = Frosted Ribbed Polycarbonate
FUS = Fuse and Fuseholder
GN = Generator Transfer Device
H/L = Dual Circuit for High/Low Light Level for LED
LEC3 = LED Emergency Circuit [1] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
LEC6 =  Emergency Circuit [2] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
PHT7 = Integral Photocell 277V
RC = Ribbed Clear Prismatic Polycarbonate Diffuser
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Refer to EM Table for options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

Wisconsin Oval 6" Series
----------------------------------------------------------------------------------
CT3 = +/-3000K LED/QL Color Temp
CT4 = +/-4000K LED/QL Color Temp
CT5 = +/-5000K LED/QL Color Temp
DIM = Dimming Ballast (*Refer to DIM Table for Options)
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Refer to EM Table for Options)
FRC = Frosted Ribbed Polycarbonate
FUS = Fuse and Fuseholder
GN = Generator Transfer Device
H/L = Dual Circuit for High/Low Light Level for LED
LEC3 = LED Emergency Circuit [1] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
LEC6 =  Emergency Circuit [2] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
PHT1 = Integral Photcell 120V
PHT7 = Integral Photocell 277V
RC = Ribbed Clear Prismatic Polycarbonate Diffuser
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Refer to EM Table for options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

Wisconsin Oval 8" Series
----------------------------------------------------------------------------------
CT3 = +/-3000K LED/QL Color Temp
CT4 = +/-4000K LED/QL Color Temp
CT5 = +/-5000K LED/QL Color Temp
DIM = Dimming Ballast (*Refer to DIM Table for Options)
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Refer to EM Table for Options)
FRC = Frosted Ribbed Polycarbonate
FUS = Fuse and Fuseholder
FUS2 = Double Fusing (MH Only)
GN = Generator Transfer Device
H/L = Dual Circuit for High/Low Light Level for LED
LEC3 = LED Emergency Circuit [1] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
LEC6 =  Emergency Circuit [2] Three Watt (*Must Specify Voltage for Incoming EM Circuit [by Others] A = 12V or B = 120v)
PHT1 = Integral Photcell 120V
PHT7 = Integral Photocell 277V
RC = Ribbed Clear Prismatic Polycarbonate Diffuser
REM = Remote Emergency Battery (self contained in CA - Must Specify Voltage [120V or 277V] *Refer to EM Table for options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

−   Painted Finishes:
BK = Black (Standard)
BZ = Bronze
SV = Silvadillo Gray
WHT = White