Click to Enlarge Image

Additional Images
 
The North American Collection
WISCONSIN ROUND SERIES
  • Durable Oval Polycarbonate Diffuser
  • 3 Decorative/Interchangeable Cage Options
  • 3 Available Depth Size Series
  • Qualifies Under Provisions for the "Buy American Act"
Download: Wisconsin Round Series Spec-Sheet
*Click +/- to expand/collapse information
  Product Specifications:
Driver: Universal Voltage 120/277 Volt Electronic Driver.

Diffuser: Injection molded polycarbonate opal white is standard. Ribbed clear prismatic polycarbonate is optional.

Finish: Super durable oven baked polyester powder finish.

Lens Fasteners: 4 Stainless steel tamperproof screws to secure diffuser in place.

Gasketing: One piece die cut .1875" thick black EPDM or neoprene rubber.

Housing: Cast Aluminum.

Lamp: Energy efficient LED.

Reflector: .032 aluminum for high efficiency.

Compliance: Built according to U.S. and Canadian safety standards. Suitable for Wet Location with 4-point mounting..

NOTE: *For Dimming and Emergency Options, Consult Factory.

  Series:
Wisconsin Round Series
----------------------------------------------------------------------------------
GB = Greenbay Deep Series
KN = Kenosha Deep Series
ML = Milwaukee Deep Series

  Sizes:
Wisconsin Round 4" Series = 13¾" Diameter x  4" Depth
Wisconsin Round 6" Series = 13¾" Diameter x 6½" Depth
Wisconsin Round 8" Series = 13¾" Diameter x 8" Depth

  Max No. of Lamps/Wattages:
Wisconsin Round 4" Series
----------------------------------------------------------------------------------
LED15 = 15 Watt
LED25 = 25 Watt

Wisconsin Round 6" Series
----------------------------------------------------------------------------------
LED25 = 25 Watt
LED30 = 30 Watt
LED40 = 40 Watt
LED50 = 50 Watt

Wisconsin Round 8" Series
----------------------------------------------------------------------------------
LED40 = 40 Watt
LED50 = 50 Watt

  Color Temperature:
CT3 = +/-3000K LED Color Temp
CT4 = +/-4000K LED Color Temp
CT5 = +/-5000K LED Color Temp
CT65 = +/-6500K LED Color Temp

  Voltage:
120 = 120 Volts
277 = 277 Volts
347 = 347 Volts
UNV = 120~277 Universal Volt Electronic Driver (Must Specify Voltage for EM Option)
2UNV = Two 120~277 Universal Volt Electronic Drivers (Must Specify Voltage for EM Option)

  Options:
0-10D = 0-10V Low Voltage LED Dimming
CPF = Clear Prismatic Flat Lens [Not Available for Size 4]
FRC = Frosted Ribbed Polycarbonate Diffuser
OWF = Opal White Flat Lens [Not Available for Size 4]
FRC = Frosted Ribbed Clear Prismatic Polycarbonate Diffuser
EM = Emergency Battery (Must Specify Voltage [120V or 277V]; *Consult Factory for EM Options)
FUS = Fuse and Fuseholder
DFUS = Dual Fuse and Fuseholder
GN = Generator Transfer Device
H/L1 = High/Low Light Level for LED
-Single AC-Input Feed / Switch Sensor (Required)
H/L2 = High/Low Light Level for LED
-Wired for Dual AC Input Feeds
MD = Integral Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
MDX = External Motion Detector
-Specify "A" for Single Circuit: All On / All Off
-Specify "B" for Single Circuit: Half On / Half Off
-Specify White (WHT) or Bronze (BZ) Finish
PHT1 = Integral Photcell 120V
PHT7 = Integral Photocell 277V
PHTD = Integral Photocell Dual voltage 120/277V
RC = Ribbed Clear Prismatic Polycarbonate Diffuser
REM = Remote Emergency Battery  (self contained in CA - Must Specify Voltage [120V or 277V] *Consult Factory for REM Options)
SU = Surge Protection for LED Fixtures
TPD = Tamperproof Screwdriver

  Painted Finishes:
BK = Black (Standard)
BZ = Bronze
SV = Silvadillo Gray
WHT = White